Inkxaso ye-spindle ithatha umgangatho ophezulu, ukuchaneka okuphezulu, iibheringi ezinesantya esiphezulu, kunye ne-spindle frequency conversion frequency regulation.I-shaft ephambili inokuxhotyiswa nge-servo main shaft motor kunye ne-servo drive, enciphisa ukuqala kunye nexesha lokuqhawula ngama-50%.Isantya esincinci sokusika i-shaft ephambili yi-50r / min.
I-lathe iqhutywa zizikrufu zebhola ezichanekileyo zohambo oluthe nkqo nokuthe tye.
Ikhuselwe ngokupheleleyo okanye i-semi-protected, yonke isiseko sebhedi, iileyile zesikhokelo zebhedi ziyacinywa kwaye zicolwe ngokucokisekileyo kunye ne-ultrasonic frequency, kunye ne-sliding guide rails zonke zeplastiki-laminated.
Isithuba sesixhobo sinomqolo wesixhobo okanye isithuba sesixhobo sesikhululo sesine, okanye ezimbini zinokuxutywa ukwandisa inani lezixhobo, ezinokukhethwa ngumsebenzisi.
I-chuck, i-spring chuck kunye ne-tailstock ine-manual, i-hydraulic kunye ne-pneumatic options.
Uqwalaselo oluphambili lwenkqubo ye-CNC: KND, GSK, FANUC, Siemens, HNC, ezinye zikhethwa ngabasebenzisi.
| Into | CK6130 |
| Max.swing dia.phezu kwebhedi | 300mm |
| Max.swing dia.phezu kwesilayidi esinqamlezileyo | 100mm |
| Max.ubude bokuqhuba | 400mm(ikholethi) |
| Dia.womngxuma wokusonta | 48mm |
| Ngomngxuma dia.umbhobho wokuzoba | 41mm |
| Isantya se-spindle | 150-2500rpm |
| Isibambi sesixhobo | umnini isixhobo sodidi lwemigulukudu |
| Icandelo lebha yesixhobo | 20x20 16X16mm |
| Amandla enjini aphambili | 4kw |
| I-X/Z i-axis yokuhamba isitoke(mm) | 300/380 |
| X/Z i-axis ekhawulezayo yokondla isantya | 8/10 m/min |
| X/Z ukuchaneka kwendawo ye-axis(mm) | 0.01/0.015 |
| X/Z-axis ukuphinda-phinda(mm) | 0.012/0.013 |
| Tailstock sleeve dia. | 60mm |
| Uhambo lwe-tailstock sleeve | 100mm |
| Tailstock taper | MT4 |
| Ubungakanani | 1750X1200X1570 |
| ubunzima | 1220kg |
| Ubumbeko: | Ubumbeko obunokuzikhethela: |
| I-GSK 928TD-L | I-hydraulic chuck okanye i-collet |
| Inkqubo yokuthambisa ngokuzenzekela | Isikhululo esi-4 somphathi wesixhobo sombane |
| Inkqubo yokukhanyisa | Isikhululo esi-6 somphathi wesixhobo sombane |
| Inkqubo yokupholisa | |
| I-pneumatic collet | |
| 380V 3 isigaba(ukuba indawo yakho inesicelo esikhethekileyo pls usazise | |
1.Ukuphoswa: I-HT300 yentlabathi ye-resin enganyangekiyo kwisanti inoxinaniso oluphezulu kunye nokumelana nokunxiba kakuhle!Isali ithatha isakhiwo sokuphosa esiphindwe kabini, kunye nesakhiwo esikhulu sekholomu esine-A sibonisa ukukwazi ukusika ukuqina.
2. I-Spindle: ithatha i-Taiwan high-speed spindle 8000rpm, isakhiwo esilula kunye nesicatshulwa, ukusebenza okuphezulu, ingxolo ephantsi, i-vibration ephantsi kunye nokuchaneka okuphezulu.
I-3.Isikruru: I-screw yesikhokelo samkela i-JIS-C3 yokugaya ibakala lokusila kwangaphambili esolulwe i-nut screw ukuphelisa i-backlash, emva kokunyangwa kobushushu, inobungqongqo obuhle, ukuxhathisa ukunxiba, kwaye iqinisekisa ukuchaneka okuphezulu kokusebenza.
4. Umtshintshi wesixhobo esizenzekelayo: Uhlobo lomnqwazi waseTaiwan (iimela ezili-16) imagazini yesixhobo.Izinto eziluncedo: ukunxiba okuphantsi, ubomi obude, uhlengahlengiso olulula, kunye nesantya esisezantsi sokungaphumeleli.
5.Uvavanyo: Zonke izixhobo zasefektri ziye zadlula kumanyathelo okuhlolwa kwe-laser interference, umatshini wokukopa, umlinganiselo wokwenyani, njl.njl.
umgangatho wemveliso yemveliso nganye
| Into | ||
| Ubungakanani betafile yokusebenza(ubude×ububanzi)mm | 1000*400 | 1000×500 |
| T slot (mm) | 5-18x100 | 5-18x100 |
| Ubukhulu bomthwalo wokulayisha kwitafile yokusebenza | 500KG | 600kg |
| Uhambo lwe-X-Axis(mm) | 800 | 800 |
| Uhambo lwe-Y-Axis(mm) | 500 | 500 |
| Z-Axis uhambo(mm) | 500 | 500 |
| Umgama phakathi kwempumlo yokusonta kunye netafile | 105-550 | 105-605mm |
| Umgama phakathi kombindi we-spindle kunye nekholamu(mm) | 450 | 550 |
| I-Spindle taper | BT40-140 | BT40-150 |
| Max.isantya sokujikeleza (rpm) | 8000/10000/12000 | |
| Amandla e-Spindle motor (Kw) | 5.5KW | 7.5/11kw |
| Isantya sokutyisa esiKhawulezayo: X,Y,Z umgca ohamba phakathi/umzuzu | 16/16/16 (24/24//24 liner guide) | |
| Isantya sokusika ngokukhawuleza m / min | 10m/min | |
| Ukuchaneka kwesikhundla | ±0.005 mm | ±0.005 mm |
| Phinda ukuchaneka kwendawo | ±0.003 mm | ±0.003 mm |
| Uhlobo lokutshintsha isixhobo esizenzekelayo | Izixhobo ezili-16 zohlobo lwesixhobo sokutshintsha isixhobo (ukhetho lwama-24 lwesixhobo sokutshintsha isixhobo esizenzekelayo) | |
| Max.ubude besixhobo | 300mm | |
| Max.Idayamitha yesixhobo | Φ80(isixhobo esisecaleni)/φ150(isixhobo esingekho ecaleni) | |
| Max.isixhobo ubunzima | 8kg | |
| Ixesha lokutshintsha isixhobo (isixhobo ukuya kwisixhobo) | 7imizuzwana | |
| Uxinzelelo lomoya | 0.6 Mpa | |
| Ubunzima bomatshini | 4200KG | 5500KG |
| Ubungakanani bubonke(mm) | 2600*2300*2300 | 2600*2300*2300 |
Ixesha lokuposa: Sep-02-2021